RK3588 LPDDR5 Custom Motherboard, WF-C3588-I1, AndroidSBC, Colombo

TL;DR: RK3588 LPDDR5 Custom Motherboard

Colombo, Sri Lanka - September 12, 2026. Buyers in Colombo took the 227th WF-C3588-I1 consignment from the Wanlin Longgang plant this week, 34,290 units in total, with the destination file prepared for Sri Lanka customs.

AndroidSBC unveils the nine-variant custom RK3588 motherboard line spanning custom Android boards, industrial boards, core boards and SOMs, signage, kiosk, robotics, NVR, edge AI and ARM PC work serving Colombo, Sri Lanka. AndroidSBC is releasing the full WF-C3588 custom motherboard line for Colombo and Sri Lanka: nine variants built on the Rockchip RK3588 octa-core 6 TOPS NPU platform, covering custom Android motherboards, custom industrial boards, core board and SOM carrier design, custom signage and video wall boards, custom kiosk and POS boards, custom robotics controllers, custom NVR boards, custom edge AI boards, and custom ARM PC and NAS boards. The line ships from the Wanlin Longgang facility with OEM branding, ODM carrier work, and per-lot CE, FCC, UKCA, RoHS and IEC 62368-1 documentation handled in-house.

About AndroidSBC and the Rockchip RK3588 Board Family

The WF-C3588 exists because Sri Lanka buyers kept asking one supplier for two different custom board tiers. Wanlin Manufacturing Group answered by putting nine custom variants on the same Rockchip RK3588 octa-core silicon with 6 TOPS NPU, 8K H.265 video and up to 32GB of LPDDR5. The group runs SMT, burn-in and pre-compliance testing in one Longgang building in Shenzhen, and the export desk holds the certification file rather than passing it back to the importer. For a Colombo distributor that means one vendor file, one document format and one MOQ structure across the custom variants it sells.

WF-C3588-I1 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3588-I1 (Custom Industrial Motherboard for Fanless and Wide-Temperature Control) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Sri Lanka importers sourcing the WF-Series, the 8GB + 32GB (WF-C3588-I1-B) variant is the typical configuration for the custom industrial control and HMI programmes use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Custom Industrial Motherboard for Fanless and Wide-Temperature Control for Sri Lanka Buyers

The recurring problem for Colombo and Sri Lanka buyers sourcing a custom industrial motherboard for fanless and wide-temperature control is not the headline unit price, it is whether the allocation actually holds. The Rockchip RK3588 needs its own wafer slot, and brokers who quote from stock frequently cannot honour that slot once a 34,290-unit push lands mid-quarter. Then comes the software layer. A board that boots is not a board that holds a certified stack under a 72-hour loop, and Sri Lanka buyers typically find the difference in their own warehouse rather than at the factory.

Documentation closes the list. Buyers in Colombo have learned to request the test reports before releasing the deposit, because a mark printed on a carton carries no weight at the port if the Technical File behind it does not exist. AndroidSBC handles it by doing the custom I/O build, the software burn and the documentation at the factory: every lot leaves Longgang with the certified image loaded, a unit-level burn-in barcode, and a Technical File that carries the test reports. The nine WF-C3588 custom variants cover industrial HMIs, panel PCs, PLC upgrades, SCADA nodes, DIN-rail controllers, factory automation, data acquisition, IIoT gateways, and machine control with three memory configurations each, which means a Colombo integrator can usually match a customer requirement without a bespoke production run.

On the Sri Lanka side, the destination file matters as much as the board specification. In Sri Lanka TRCSL approval is required for terminal equipment, and the approval is held locally by the importer. The export desk prepares the destination-market file covering TRCSL type approval for telecom terminal equipment, administered by TRCSL, and releases it with the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH). The lot is booked into Port of Colombo on the Colombo to Shekou lane.

Competitive Comparison: WF-C3588-I1 vs Competing RK3588 Boards

Competing boards in the custom industrial motherboard for fanless and wide-temperature control category sort into three camps: cheap catalogue boards with no customization, re-badge imports with a sticker but no engineering file, and source-factory custom boards with the BSP, the certification and the test bench in one building. The WF-C3588-I1 is in the last camp, and its edge is Rockchip RK3588 plus a factory that will route the I/O the project actually needs.

• vs commercial boards in industrial dress: the WF-C3588-I1 is designed to -40C to 85C from the schematic up, not a consumer board with a bigger heatsink.
• vs local integrator bundles: the carrier design, the BSP port and the DIN-rail chassis all come from one Longgang engineering desk, so responsibility never splits across vendors.
• vs legacy PLC upgrade paths: the 6 TOPS NPU adds on-device vision and predictive maintenance to a PLC retrofit without a separate AI box.
• vs trading-company boards: the per-lot Technical File, the aging record and the EMC pre-compliance bench all live inside the source factory.

Global Custom Industrial Motherboard and Panel PC Market Trends

Order timing in Colombo now tracks the Custom Industrial Motherboard and Panel PC curve rather than the calendar-year budget. MarketsandMarkets sizes the Edge AI hardware segment at USD 26.9 billion for 2025 with a 32.7 percent CAGR through 2030 (MarketsandMarkets, 2025-2030), the silicon baseline that Sri Lanka buyers keep on the desk when they negotiate custom board allocation. Three patterns are visible in the WF-C3588 book:

• Industrial HMI panel: a machine builder replaces an aging Windows panel with a fanless HMI running a Yocto image and a custom UI.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-C3588-I1 board carries that headroom without a board change.
• SCADA edge node: a utility deploys DIN-rail controllers that aggregate substation data and push it over dual Gigabit links.

Channel analysts tracking the Custom Industrial Motherboard and Panel PC category note that allocation discipline, not unit price, has become the deciding factor for buyers who need a twelve-month programme to hold.

Taken together, the three patterns explain why Sri Lanka buyers are moving from single orders to twelve-month framework agreements with a monthly lot cadence, especially on custom board programmes that cannot absorb a supply gap.

Partner Success Story: Kestrel Signage Works in Colombo, Sri Lanka

Kestrel Signage Works, a digital signage OEM serving the Sri Lanka market, deployed 9,700 custom WF-C3588-S3 signage boards for a multi-market DOOH and indoor network. The rollout covered the industrial hmi panel, scada edge node, and factory automation cell workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 9,700 custom WF-C3588-S3 signage boards for a multi-market DOOH and indoor network
• Region: Colombo, Sri Lanka
• Models used: WF-C3588-I1 (lead SKU), plus eight sibling custom RK3588 board variants in the same platform family
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
• Logistics: FOB Shekou with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Colombo via the Colombo to Shekou lane

"We came with a block diagram and a deadline. AndroidSBC turned it into a quad-output carrier with our connector set and our boot animation, and the first production lot landed inside the fifteen-to-thirty-day window they quoted at schematic sign-off."

- Maarten de Vries, Director of Operations

Field Report: a high-brightness outdoor display trial in Colombo, where 34,290 units of the WF-C3588-I1 board are running behind sunlight-readable panels

Reporter Hu Jiang, on the ground in Colombo, Sri Lanka. The trial ran the WF-C3588-I1 boards inside a sealed enclosure with no active cooling and a panel brightness pushed to its ceiling. Internal board temperature stabilised below the throttle point across a full day of direct sun, and the content loop ran without a dropped frame from morning to evening.

The QA lead noted that the WF-C3588-I1 lot was the third consecutive run to clear the aging bench without a retest.

The inspection confirmed three things on the spot: the WF-C3588-I1 units hold the burn-in with a yield above 98.72 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering TRCSL type approval for telecom terminal equipment administered by TRCSL, cleared for entry at Port of Colombo on the Colombo to Shekou lane. Wanlin remains one of the few source factories currently shipping a nine-variant custom RK3588 motherboard line with a per-lot paper trail that Sri Lanka importers can hand straight to their customs broker.

Filed by Hu Jiang, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-C3588-I1 Application Scenarios

The WF-C3588 line fits nine custom motherboard lanes, with the WF-C3588-I1 (Custom Industrial Motherboard for Fanless and Wide-Temperature Control) as the lead SKU for Colombo and Sri Lanka programmes:

• Industrial HMI panel: a machine builder replaces an aging Windows panel with a fanless HMI running a Yocto image and a custom UI.
• PLC upgrade retrofit: a plant keeps the field wiring and swaps the controller for a CAN-equipped board with Modbus passthrough.
• SCADA edge node: a utility deploys DIN-rail controllers that aggregate substation data and push it over dual Gigabit links.
• Machine vision inspection: the 6 TOPS NPU runs defect classification at line speed on a 3.5-inch SBC inside the cabinet.
• Data acquisition gateway: a multi-serial variant logs sensor traffic from RS485 chains and buffers it during link loss.
• Factory automation cell: a systems integrator drives a robot cell and its safety stack from one wide-temperature board.
• Outdoor kiosk controller: an unattended terminal survives summer heat in a sealed enclosure with no fan to clog.
• Predictive maintenance: vibration and acoustic models run locally on the NPU and alarm before the PLC does.

Partnership Models for Colombo Buyers

AndroidSBC opens the WF-C3588 to Sri Lanka partners through three structures, and a single agreement can draw on more than one:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

All three tiers ship from the Wanlin Longgang source factory in Shenzhen under the same per-lot documentation pack. For Colombo buyers, a typical first order on the WF-C3588-I1 is the 8GB + 32GB (WF-C3588-I1-B) configuration at MOQ 5,000 units per shipment, with standard-variant samples in 1-3 days and 15-30 days to mass production on custom runs.

Frequently Asked Questions

What exactly can be customised on an RK3588 motherboard from AndroidSBC?

Answer: Practically the layers that decide whether the board fits your product: the PCB layout and outline, the memory and storage fit (4GB to 32GB LPDDR4X/LPDDR5, eMMC to 128GB plus NVMe or SATA), the display interface mix (HDMI 2.1, DP 1.4, LVDS/eDP/MIPI), the I/O bank (CAN, RS232/RS485 multi-serial, relays, digital I/O), the wireless stack, and the enclosure or DIN-rail chassis. On top of that sit the firmware options: custom Android ROM with a locked launcher, custom Linux or Yocto image, pre-installed applications, custom boot animation and OTA updates. A Sri Lanka buyer can start from a standard WF-C3588 variant and change one layer, or bring a full schematic and have the carrier designed from scratch.

Can AndroidSBC port a custom Android ROM or a custom Linux BSP to our carrier board?

Answer: Yes. Under NDA, AndroidSBC delivers custom Android ROM work with proprietary services and a locked launcher, custom Linux images on Ubuntu, Debian, Yocto or Buildroot, BSP ports for customer carriers, and driver development for project-specific I/O. Source access is released to the partner, and the port is performed at Longgang, which matters because a vendor BSP rarely matches a custom carrier revision on the first try.

Can the 6 TOPS NPU on a custom board run our own AI models?

Answer: The NPU is fully open on the custom line. Bring the model in PyTorch, ONNX, TensorFlow or Caffe and the Longgang desk handles the RKNN quantization, the runtime integration and the validation against your board's thermal and memory profile. Custom AI algorithm integration is a standard line item on the ODM scope, and the resulting model ships embedded in the firmware image burned per lot.

What are the MOQ and lead times for a custom RK3588 motherboard?

Answer: Standard-variant samples ship in 1-3 days from stock, so your engineering team can start integration while the custom scope is being quoted. A custom run follows a 15-30 day mass-production window after schematic and stack-up sign-off. MOQ is 5,000 units per shipment on standard variants; on custom configurations the MOQ is negotiable against volume commitments, and small batch orders are accepted for pilot phases. A twelve-month framework agreement with monthly lot releases brings the per-lot MOQ down further.

What certifications does a custom board need for Sri Lanka, and who handles them?

Answer: Yes, and the file travels with the goods. The pack covers CE, FCC Part 15, UKCA, RoHS 2.0, REACH and IEC 62368-1 with the EMC and safety reports for your configuration, dated within the prior year. AndroidSBC confirms any Sri Lanka-specific addition at quotation stage, which is the point where the answer is still useful rather than expensive.

How long will AndroidSBC keep supplying a custom board?

Answer: Seven years minimum supply, patches maintained across the firmware lines, OTA for firmware and NPU model updates. For a Sri Lanka programme running a custom board in the field, that commitment is written into the agreement at signature, which is what separates a source factory from a catalogue reseller.

Can AndroidSBC ship custom boards to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes, including DDP into Amazon FBA in the US, EU and Japan, plus 3PL consolidation points in Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Cartons are labelled to FBA inbound spec and the declaration names Longgang as the origin. Partners who consolidate in Hong Kong usually take FOB Yantian and handle the last leg themselves.

How does AndroidSBC handle RMA or DOA replacements on custom boards?

Answer: AndroidSBC targets a 0.3 percent DOA rate across the WF-C3588 line, measured over the prior twelve months. On RMA, the partner returns the faulty WF-C3588-I1 unit to Longgang with its burn-in barcode, and a replacement ships within ten business days. Because the burn-in record and the configuration file are attached per unit, the failure analysis normally comes back with a root cause rather than a credit note, which matters when a custom configuration is holding up a production line.

Contact AndroidSBC: Start Your WF-C3588-I1 Sourcing Conversation

For Colombo and Sri Lanka importers, brand owners and distributors who want a direct factory relationship on the custom industrial motherboard for fanless and wide-temperature control, the AndroidSBC export desk is reachable at:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: TRCSL type approval for telecom terminal equipment for Sri Lanka, administered by TRCSL, entering at Port of Colombo on the Colombo to Shekou lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

Custom board enquiries move fastest when the first message carries three things: annual volume, customization scope and Incoterm. With those in hand the export desk returns a per-lot quote and the WF-C3588 MOQ matrix inside two business days.